Ecodyne Water Systems TB-RO Installation And Operation Manual Download

Page: 23 / 23

These o-rings and collets are for replacement in the manifold housing only.

They do not fit the other push-in fitting on Key No. 17.

Not included.

Tubing lengths for remote installations, direct replacement for colored lengths of tubing.

Not illustrated.

Parts List

Key

No.

Part No.

Description

9006062

Screw (2 req’d)

9041700

Hanger Washer (2 req’d)

7115432

O-ring (2 req’d)

7272658

Check Valve

7273337

Screw (6 req’d)

7281330

Washer (4 req’d)

7273345

Automatic Shut-off Cover

7250876

Diaphragm Kit

7234325

Plunger & Spacer Ring Kit

7275185

Flow Control Insert

7253785

Elbow, Plug-in, 1/4 Stem

x 1/4 Tube

1081-01-FA-Z2

Pre & Post Filter Cartridge

1081-01-FB-Z1

RO Membrane Cartridge

7205326

Storage Tank

9003203

Nut, 3/8” Tubing

7131349

Insert, 3/8” Tubing

Key

No.

Part No.

Description

7201681

Connector, 1/4 NPT x 3/8 Jaco

7208489

Drain Adapter

7227310

Tee, Feed Adapter

7292682

Faucet, with base and electronics

7272763

Cover

7281005

Push-in Fitting Kit, 1/4”

7281013

Push-in Fitting Kit, 3/8”

7315189

Auxiliary Storage Tank

7161823

Tubing, 1/4” x 20’ - white

7161784

Tubing, 1/4” x 100’ - white

7157280

Tubing, 3/8” x 20’ - white

7161750

Tubing, 3/8” x 100’ - white

7314183

Coin Battery

7273557

Tube Bend - 5/16”

7273565

Tube Bend - 3/8”

7279749

Dropper

To order replacement parts, call toll free 1-800-689-4571, Monday - Friday, 8:30 am - 6:00 pm EST, or Saturday 9:00 am - 3:00 pm EST.

Manufactured for Defender Security Company by

Ecodyne Water Systems

1890 Woodlane Drive

Woodbury, MN 55125

Summary of Contents for TB-RO
























Search results

Summary of Contents for TB-RO

Reviews:

Related manuals for TB-RO

Brands by name

Popular brands

Ecodyne Water Systems TB-RO, Installation And Operation Manual

Search results

Summary of Contents for TB-RO

Reviews:

Related manuals for TB-RO

Brands by name

Popular brands