Maintenance
Do not splash water inside the hand dryer during
servicing
and
maintenance as this may cause electric shock and/or faults
Please turn off the power source to the hand dryer before
performing any servicing or maintenance
Cover cleaning
For cleaning the cover of dirt and marks, turn off the power source, then use a
soft cloth to wipe the cover clean. For more persistent stains
use
a
damp soft
cloth and neutral detergent, making sure not to excessively wet the hand
dryer. Remove any detergent using a damp soft cloth and dry thoroughly.
You should not use acid or alkaline detergents like benzene, lacquer
thinner or other abrasives. Moreover you must not use nylon brushes or
similar in order to avoid damage to the cover
SENSOR WINDOW
To
ensure
the senso
r
works perfectly, turn off the power source, then
use a damp soft cloth to wipe the sensor window clean.
Cleaning the sensor window
Perform once or twice per month
Do not use detergent on the sensor window
as it may lead to damage and/or sensor
abnormalities.
Filter pack maintenance
(Prevent
reduction
in air
quality a
nd volume)
The filter may become clogged up over
time
and
reduce
the
air
quality
and volume. Please clean or replace the
filter periodically
Take out the filter box
Take out the filter
Clean the filter
Return the filter to
the filter box
Return the filter box
to
the
hand
dryer
Take hold of the jut at the
centre of the filter box and pull
downwards
Take out the filter from the filter
box
Shake the filter over a bin to remove dust
and dirt from it. If this does not remove it
sufficiently, please replace the filter.
DON'T
WASH
Put the filter back in the filter
box
Return the filter box to its
original place
