Step 1. Press the reset
button three times.
Step 2. The indicator
will start blinking purple
and stay on for 10
seconds when the
removal is complete.
Timeout 3 minutes.
METHOD 1.
From your Zigbee Hub interface, choose to wipe or reset the device according to
the instructions.
3) REMOVE:
There are two methods to remove the device from the Zigbee network.
METHOD2.
Step 1. Press the reset
button for 4 times.
Step 2. The indicator
starts blinking green
and stays solid for 10s
when pairing is
succeeds. Time out
15mins.
4) TOUCHLINK:
Right channel only), For left channel please see Find and Bind section
Step 3. .Bring the remote within 10cm of the smart dimmer and set the remote into
TouchLink commissioning.
Please note: TouchLink takes effect when both devices have not been added to a ZigBee network and each
device can be connected to a remote control
20
Summary of Contents for ECO-DIM.05 Zigbee
