16
into “exclusion” mode, and press the inclusion
button of sensor once to be excluded.
Note:
During the inclusion/exclusion phase, the device
should be within 1 meter of MyVirtuoso Home gate-
way.
3.
Remove the bracket from the detector by rotat-
ing it anti-clockwise.
4.
Place the bracket where you are going to install
the detector. In each keyhole slot, draw a mark to
locate rawl plugand screw. Using a 5mm drill bit,
drill two holes at the marks and insert rawl plugs.
Attach the bracket by using the screws.
5.
Suggested CO detector positioning:
