5
Expansions
5
Expansions
This section contains information on expansions.
5.1
Retrofitting ecoBatteryModules
Box contents for each ecoBatteryModule
•
Rail (2x)
•
M5 bolt (6x)
•
M6 bolt (2x)
•
Cage nut (6x)
•
Flat washer (2x)
•
Spring washer (2x)
•
Power cable (1x red and 1x black)
•
Battery connector cable (1x)
Prerequisites
ATTENTION
If an emergency power supply is available, power to the outlets must be shut off here.
ATTENTION
Storing the ecoBatteryModule
•
Store the ecoBatteryModule in a dry place and prevent the ingress of liquids.
•
Do not store objects on the ecoBatteryModule.
ATTENTION
Wear your personal protective equipment.
ATTENTION
Please read the safety notices on the ecoBatteryModule.
INFORMATION
It is recommended that the previous ecoBatteryModules have an SOC of <10% before a
new ecoBatteryModule is installed. If the difference between the existing and newly installed
ecoBatteryModules is high, it will take longer until all have the same SOC.
28
TM_ecoBatterySystem_2.2_en-UK
