4
Portable Infrared Heater REM/RET
ECO CALORIA Sp. z o.o.
27-200 Starachowice, ul. Zgodna 2
Tel.: +48 41 274 14 41 fax: +48 41 273 71 47 [email protected] www.ecocaloria.com
Replacing the Lamp
1. Disconnect from the power supply before attempting to replace any lamp.
2. Remove the guard by removing the guard fixing screws.
3. Remove the screws from the end extrusion(s) and fascia panels adjacent to the failed lamp (see Fig. 1 for
illustrative purposes only).
4. Remove the panels to expose the lamp connections (see Fig. 2) .
5. Disconnect lamp leads from terminal plates and remove the retaining clips (see Fig. 3).
6. Slide the lamp through the extrusion.
7. Fit a new lamp, taking care not to mark the reflector or handle the lamp.
8. Replace the end extrusion(s) and fascia panels securely, using the fixings previously removed and refit the
guard.
Fig. 1
Fig. 2
Fig. 3
