manualshive.com logo in svg

Ecobee EMS Si, Manual, Page: 61 / 73

Share
Download
Ecobee EMS Si Manual Download Page 61

Fan

Toggles the fan setting between ON and Auto.

   

ON

  The fan runs all the time regardless of 

programming or if there is a call for heat or 

cool. The fan will also run if the System Mode 

is OFF.

   

Auto

  This option turns the furnace fan on but 

only when the system is heating or cooling 

your home, or to satisfy the minimum fan run 

time as programmed.

   

Fan Min On Time 

 This feature allows you to 

determine a minimum time per hour that the 

furnace fan will run. It results in increased air 

circulation and a more consistent temperature 

within the home, and is more cost effective 

than choosing the ON fan setting.

In either mode, the EMS Si will ensure that when 

your calendar event ends, the EMS Si will revert 

to the regular settings.

Note: If you were running your regular program 

prior to the start of your calendar, on your return, 

the EMS Si will restore your building to those 

settings. If you were in Hold mode prior to the start 

of your calendar event, the EMS Si will restore the 

home to whatever the set temperature was just 

prior to your calendar event.

56

Summary of Contents for EMS Si










































































Reviews:

No comments