11
Guide for operation- General operation
1. After powered on, press ON/OFF button, the unit will start to
run.(Note: When it is powered off, the guide louver of main unit
will close automatically.)
2. Press MODE button, select desired running mode, or press
COOL or HEAT mode to enter into the corresponding operation
directly.
3. Pressing + or - button, to set the desired temperature. (It is
unnecessary to set the temp. at AUTO mode.)
4. Pressing FAN button, set fan speed, can select AUTO, FAN 1,
FAN 2, FAN 3 or FAN 4.
5. Pressing SWING button (Optional), to select the swing.
Guide for operation- Optional operation
1. Press SLEEP button, to set sleep.
2. Press TIMER button, can set the scheduled timer on or timer
off.
Changing batteries and notices
1.Slightly to press the place
2.Take out the old batteries. (As show in figure)
3. Insert two new AAA1.5V dry batteries, and pay attention to
the polarity. (As show in figure)
4. Attach the back cover of wireless remote control. (As show in
figure)
ƾ
NOTE:
ƽ
When changing the batteries, do not use the old or different
batteries, otherwise, it can cause the malfunction of the wireless
remote control.
ƽ
If the wireless remote control will not be used for a long time,
please take them out, and don't let the leakage liquid damage
the wireless remote control.
ƽ
The operation should be in its receiving range.
ƽ
It should be placed at where is 1m away from the TV set or
stereo sound sets.
ƽ
If the wireless remote control can not operate normally, please
take them out, after 30s later and reinsert, if they cannot
normally run, please change them.
Summary of Contents for ECO8P
Page 7: ...5 Front Rear ...