Operation of remote control
Guide for operation-general operation
1.Press ON/OFF button to start the unit after powering
the main unit on.(Note: The big -guide louver and
small-guide louver will close automatically during
Power on).
2.Press MODE button to select desired running mode.
3.Press +/ - button to set the desired temperature
.
(You cannot set the temperature in AUTO mode, it is preset)
4. Press FAN button to set fan speed, (AUTO FAN,
LOW, MID or HIGH).
5. Press
and
button to set swing mode.
(
button only for some models)
ON/OFF
MODE
FAN
X-FAN
TEMP
TIMER
TURBO
SLEEP
LIGHT
Guide for operation-optional operation
1.Press SLEEP button, set the sleep mode.
2.Press TIMER button, then press +/- button, to set the
scheduled timer on or timer off.
3. Press light button to control display light on or off.
4. Press X-FAN button to set X-FAN function on or off.
5. Press turbo button to set this function on or off.
Introduction for special function
★
About X-FAN function
ON/OFF
MODE
FAN
X-FAN
TEMP
TIMER
TURBO
SLEEP
LIGHT
This function removes moisture on the evaporator of indoor unit, after the unit is stopped to
avoid mould and bacteria growth.
During X-FAN function on: After turning off the unit by pressing ON/OFF button
indoor fan will continue running for about 10 min. at low speed. During this, pressing
the X-FAN button will stop this function.
9
Summary of Contents for ECO1218SD
Page 12: ......