5
WALL-MOUNTING INSTRUCTION
CHARCOAL FILTER
FIT THE TANK
The tank must be fitted properly.
When the tank is full or is not in place,
the " FULL" lights indicator will illuminate.
If you need a continuous drain, follow the
instructions on page 6.
Drill two holes 20mm deep, 6mm
diameter for wall plugs (the distance
must same as the plate), then fit the
plate with screws in horizontally.
Be sure to fix it firmly. You can also use
other screws or nails to fix into the additional holes
in the plate. Fix them firmly to avoid loosing, falling
and causing injury.
The activated charcoal filter
comes with the unit (packed with
the user manual). First pull out
the filter frame on the unit
(refer to page 7).
Unpack the charcoal filter,
insert the charcoal filter into
the filter frame and refit into the unit.
Insert and fix charcoal filter
Nylon filter frame removed
from the machine
This dehumidifier can be hung on a wall
or stand on a flat surface. It is
suggested to hang it on the wall with
more than 150cm above ground, so that
children do not interfere with it.
Hang the machine
back
above 150cm
Fit this plate
on the wall
Fit on the wall horizontally
wall
plug x2
wall
screw x2
IMPORTANT
When installing in a bathroom
or toilet the plug must be removed
and the connection made by
ELECTRICAL SPUR.
This must be performed by a
qualified electrician to avoid
personal injury.
hr
