Page 12
Check to see the following parts are supplied
with your product model:
1. Connector (1 piece): Used to attach the
water hose to the rear of the product.
2. Faucet adapter (1 piece): Used for
connection to the cold water mains.
3. Porous filter (1 piece)
4. Hose clip (3 pieces): Used to fix the water
hose on the wall.
5. Filter connecting apparatus (2 pieces):
Used to fix the filter on the wall.
6. Water filter (1 piece): Used to connect the
product to the water mains. A water filter is
not necessary when using carboy
connection.
Installation
Water filter
(Optional)
The product may have an internal or external
filter, depending on the model. To attach the
water filter, follow the instructions below.
Fixing external filter on the wall (Optional)
WARNING:
Do not fix the filter
on to the product
4. Attach the water hose extending from the
top of the filter to the product’s water
connection adaptor, (see page 10).
After the connection is established, it should
look like the figure below.
1. Connect the faucet adaptor to the water
mains valve.
2. Determine the location to fix the external
filter. Fix the filter’s connecting apparatus
(5) on the wall.
3. Attach the filter in the upright position on
the filter connecting apparatus, as
indicated on the label. (6)
