www.nbwowtech.com
5
INSTALLATION INSTRUCTION
1.
ECO Mini Purifier will offer a metallic plate, a power adapter, 4-1/4 tapping screws, a hose, a
wrench, and a screwdriver as accessories.
2.
The ECO Mini Purifier should be fastened to the wall, left above your tap. Firstly, fix the
metallic plate on the wall. The metallic plate has three mounting holes, together with 3 anchor
screws. Fasten the metallic plate on the wall with the anchor screws to support the product.
3.
Before installation, do not open the unit. There are 3 sockets on the bottom of the unit.
Collimate
the 3 sockets in the holes of the metallic plate, pull downward slowly, and then the
unit is hanging over the metallic plate.
4.
Ensure that metallic plate is horizontal. Tilt installation may affect the product operation and
visualization.
5.
Connect the water inlet on the ECO Mini Purifier to the water supply faucet; and connect the
water with the supplied hose. Make sure rubber washers are properly installed in both ends of
the hose before connection. Properly tighten the hose to the inlet fitting, but do not over tighten.
6.
Plug the supplied power adaptor into the DC adaptor plug-in on the side of the ECO Mini
Purifier unit and then plug the adapter into the wall outlet. Disconnect the power adapter when
not use the unit.