background image

0548-991-41---50e_2019.10.indd

ETS 73

0548-991/42e

Page 5 of 26

Operator manual

2 SAFETY

2.1 

Appropriate use

The swing door drive mechanism ETS 73 has been exclusively designed for operating swing doors. 

Any other use beyond these application limits is deemed inappropriate and inadmissible!

In the event of an inappropriate use of this system, the safety of the user may be jeopar dized 

and/or the installation be damaged. The manufacturer declines all responsibility for these inju

-

ries/damages!

2.2 

Safety notices

The present instructions uses the following symbols and notes in order to point out certain resi

-

dual dangers:

Warning:

Involving danger to life and limb.

Attention:

A situation where material could be damaged or the function impaired.

Note:

Hints which facilitate the work.

2.3 

Safety regulations

2.3.1 Principles

• The installation has been calculated, designed and manufactured on the basis of the latest 

state-of-the-art technology and the generally recognized safety-relevant rules and regulations. 

It may only be operated if it is in perfect condition, taking into account the specifications of the 

present manual. Any use beyond the defined application limits is inadmissible!

• The installation is to be operated and maintained in such condition that the safety is guaranteed 

at all times. An integral part of this condition is the appropriate use, the compliance with the 

operating conditions prescribed by the manufacturer, as well as the regular service (mainte

-

nance/checking).

• In order not to create any dangerous squeezing and shearing points, no structural modification 

must be made within the door surroundings, without prior authorization from ECO Schulte 

GmbH & Co. KG. Furthermore, it is important that no objects (such as furniture, pallets, etc.) be 

placed in the vicinity of the door.

• All further interventions on and modifications of the installation that are not described in the 

present instructions are forbidden!

• The swing door drive mechanism ETS 73 may only be installed and operated in dry rooms. If this 

condition cannot be fulfilled, the customer must provide sufficient protection from moisture.

Summary of Contents for ETS 73



























Reviews: