Locked layer contains
placeholder marks.
866.463.2611 • www.ecosystemsdisplays.com
Step
1
Locked layer contains
placeholder marks.
TOP VIEW
Steps:
Refer to the ECO Panel Assembly Instructions general information page.
1) Assemble ECO panels & connectors [
1
] through [
8
] together in numerical order.
2) Affix Shelf Supports to inside of panel assembly; place internal Shelf.
3) Place pedestal top onto assembled base.
4) Attach
Graphic
to front of pedestal assembly. See
Graphic Attachment
detail.
5) Connect Leg to Counter Top. See
Counter Top w/ Threaded Stud Attachment
detail.
2) Connect Counter Top to assembled pedestal.
See
Counter Top w/ Standoff Barrel Attachment
detail.
Item
1
2
3
4
5
6
7
8
Qty.
1
1
1
1
1
1
1
1
Description
15.888”w x 35”h ECO Panel
35”h 90° Connector
21.388”w x 35”h ECO Panel w/ Door
35”h 90° Connector
15.888”w x 35”h ECO Panel
35”h 90° Connector
21.388”w x 35”h ECO Panel
35”h 90° Connector
When assembled
Counter Top w/ Standoff Attachment
*
Attach standoff barrels to
nut serts in top of Pedestal.
Then connect Counter Top
to standoff barrels using
wing nuts.
Use access hole under
Counter Top when
attaching wing nuts.
wing
nut
standoff
barrel
nut
sert
Counter Top
Pedestal
Counter Top w/ Threaded Stud
Attachment
*
Insert threaded stud into
nut sert on top of Counter
Leg. Twist to secure in place.
Place holes on bottom of
Counter Top over threaded
stud & secure using wing
nuts.
Use access hole under
Counter Top when
attaching wing nuts.
wing
nut
threaded
stud
nut
sert
Counter Top
Counter Leg
* *
*
*
Counter Leg
Pedestal
Assembly
Counter Top
Pedestal Top
Shelf
1
2
2
1
8
3
4
5
6
7
Door
3
4
5
6
7
8
Graphic
Graphic Attachment
*
Graphic Screw
Cap
Stand-Off
Barrel
Attach stand-off barrel to panel using screw
from inside pedestal assembly. Then attach
graphic to stand-off using screw caps.
Panel
Screw
Mouse hole
faces
back
of
assembly
Holes for wire
management
power cord
*
*
*
*
ECO-37C
Note: Phillips screwdriver
required for installation
