866.463.2611 • www.ecosystemsdisplays.com
Step 5
Connections are made by holding the button
down and sliding the red tube into opposing
tube until the connection is made. To disassemble
push button and pull or twist extrusions apart.
Push-Button
Push-Button
6
6
6
6
Numbered Label
Using Your Setup Instructions
The Aero Overhead Sign Setup Instructions are created specifically for your configuration. They include an
exploded view of the frame which is sequentially numbered. We encourage you to study the instructions
before attempting to assemble your exhibit.
Connections are kept very simple: no tools. Everything assembles with push-button
connectors and pre-connected horizontal sections.
Cleaning and Packing Your Display
1) Use care when cleaning aluminum extrusion or acrylic inserts. Use only non-abrasive cleaners.
2) Retain all packing material. It will make re-packing much easier and will reduce the likelihood
of shipping damage.
When assembled
Steps:
1) Assemble Aero Frame parts together as shown.
NOTE: For the 10’x10’ booth configuration, attach
connections [
4
to
6
] & [
9
to
11
] together as shown.
2) Apply pillowcase graphic.
FOR 10’x10’ BOOTH CONFIGURATION:
1
2
3
4-6
7
8
11-9
12
