ECO Spot LED80 User Manual
Gobo Replacement
Unplug the power cord and let the projector cool down for 20min. Use caution, the
housing and light bulb may still be hot.
•
Unscrew the thumbscrews to remove the front cover with the projection lens.
•
The gobo rotator with the gobo holder is now exposed.
•
Carefully pull out the gobo holder.
•
Unscrew the large ring that sits in front of the gobo.
•
The old gobo is now accessible, carefully remove and replace it.
•
Screw back in the large ring, so that it just touches the gobo, don’t tighten it,
otherwise it will be hard to remove it again.
•
Replace the front cover.
•
Power on the projector and refocus the image by screwing the projection lens in or
out.
Copyright © 2014 Globus New Media LLC
Page 3
