ECO Spot LED40DE User Manual
Multi-functional Yoke
Gobo Placement
(see
Specifications
for Gobo Dimensions)
The ES-LED40DE uses D-Size
gobos
or E-Size gobos with an adapter ring. See the
Specifications for exact dimensions. For max. image size and brightness use D-Size gobos.
The recommended gobo image diameter is 35mm. An Image Diameter of up to 40mm is
possible with some loss in focusing quality for optimal focus, stay within 32mm image
size.
•
The yoke can slide over the whole length of the fixture body to accommodate a
wide range of pointing directions.
•
The yoke can also serve as stand.
•
The yoke can be screwed to a wall or ceiling or fastened with a C-clamp
•
Unscrew the thumbscrews to remove the front cover with the projection lens.
•
Push the two pins of the gobo retaining ring together and pull out the retaining
ring. Carefully remove the old gobo and replace it with the new gobo.
•
Tip:
Tilt the projector forward while placing the palm of your hand inside, the old
gobo will fall into your hand.
•
If you have a glass gobo, place the more reflective side towards the light bulb.
•
Replace the retaining ring and make sure it evenly pushes the gobo all the way
back.
•
Replace the front cover and adjust the focus by threading the projection lens in or
out.
Copyright © 2014 Globus New Media LLC
Page 3
