ECO Spot LED C2
0PC
E
User Manual
Copyright © 20
20
Globus New Media LLC
Page 3
Gobo Placement
(see
Specifications
for Gobo Dimensions)
The projector uses E-Size gobos. See the Specifications for exact dimensions.
•
Unscrew the thumbscrew
and screw into gobo holder to remove
.
•
Push the two pins of the gobo retaining ring together and pull out the retaining
ring. Carefully remove the old gobo and replace it with the new gobo.
•
If you have a glass gobo, place the more reflective side towards the light bulb.
•
Replace the retaining ring and make sure it evenly pushes the gobo all the way
back.
•
Pl
ace the
gobo holder in the slot and unscrew the thumb screw to lock it. Screw
the thumb screw into thread in front of gobo holder so it is not lost. A
djust the
focus by screwing the projection lens in or
out
until you reach a focal point, then
fine tuning focus can be down with single turns to achieve full focus.
