Installation
Connecting across a large obstruction
Magen eco-Spark
®
Installation manual. © 2012, all rights reserved
P a g e
|
24
CONNECTING ACROSS A LARGE OBSTRUCTION
For obstructions, you need to bypass the obstacle using extension pipes between the manifolds.
When connecting two panels/modules together across a large obstacle you need:
4 PPC sets
4 pipe adaptor
2 lengths of pipe cut to the required length for both top and bottom header
.
FIXING PANELS TO A SLOPING ROOF
S Roof Mounting Pads are used to secure panels to the roof or rack. The following considerations apply:
Top S Mounting pad (Cat. Num. 1203105) can be fitted to the panel along the track of the
upper manifold header.
1
2
PPC
3
Figure 6: Mounting with S Roof Mounting Pad Set
1.
In general, use two (2) top S roof mounting pads on the upper header of each panel, and
one (1) for the lower header. On roofs with a pitch greater than 30% or windy regions
you need two (2) top S roof mounting pads on the upper header and two (2) bottom S
roof mounting pads on the lower header.
Figure 5: Connecting across an obstruction