ECO Schulte ETS 42 Operator'S Manual Download Page 18

Page: 18 / 18

0549-991-41---50a_2019.11.indd

ETS 42

.............................................................................................................................................................

0549-991/42a

Page 18 of 18

Operator manual

SHUT-DOWN

No particular measures need to be taken for de-commissioning the installation.

If the swing door drive mechanism will not be used during at least 1 month, it is recommended to

pull out the mains plug.

For taking the installation back into operation, all you have to do is to plug in the mains cable and

select the operating mode. If the swing door drive mechanism has been out of operation for more

than 3 months, we recommend to have the re-commissioning carried out by your after-sales

sesrvice (address: see chapter 1).

DISPOSAL OF THE INSTALLATION

An ecologically acceptable disposal of the installation is ensured if the different

materials are separated and recycled. No particular measures are required for

the protection of the environment. However, the relevant legal prescriptions

applicable for the installation site have to be complied with!

We advise you to entrust your after-ales specialists with the dismantling and disposal of your in

stallation. They will guarantee that the work is carried out according to the rules of environmental

protection.

SETTINGS MADE BY THE AFTER-SALES SER-

VICE

10 APPENDIX

The following documents are added as an appendix to this operator manual:

• Declaration of incorporation according to machinery directive

Summary of Contents for ETS 42



















Search results

Summary of Contents for ETS 42

Reviews:

Related manuals for ETS 42

Brands by name

Popular brands

ECO Schulte ETS 42, Operator'S Manual

Search results

Summary of Contents for ETS 42

Reviews:

Related manuals for ETS 42

Brands by name

Popular brands