background image

JINECI05 Rev. E. 11/11/2014 

 

 

CONTENTS INDEX: 

 

IMPORTANT INFORMATION……………………………………………………………………………………………… 

  3 

USER INSTRUCTIONS………………………………………………………………………………………………………… 

  5 

TECHINCAL SPECIFICATION………………………………………………………………………………………………. 

  9 

PRE INSTALLATION REQUIRMENTS…………………………………………………………………………………… 

10 

INSTALLATION INSTRUCTIONS………………………………………………………………………………………….. 

11 

COMMISSIONING AND HANDOVER………………………………………………………………………………….. 

16 

MAINTENANCE & SERVICING…………………………………..……………………………………………………….. 

17 

SPARES & STOVE CARE……………………………………………………………………………………………………… 

19 

COMMISSIONING & INSTALLATION CHECK LIST……………..……………….……………………………….. 

22 

SERVICE RECORDS…………………………………………………………………………………………………………….. 

23 

 
 
 

 

 
 
Eco-ideal Stoves, 
Emperor Way, 
Exeter Business Park, 
Exeter, 
Devon. EX1 3QS 
 
Email:     

[email protected]

 

Website: 

http://www.hunterstoves.co.uk

 

 

 
W

ARRANTY

 

Eco ideal Fires appliances come with a standard 2 
year warranty, however this excludes naturally 
wearing “consumable” components and the use of 
un-authorised fuels. 
 
 
 
 
 
 

Consumables are deemed to be; 
Glass, Seals, Gaskets, Grate Components, Log 
Retainers, Baffles and the surface finish of the 
appliance. 
 
The Warranty will only be valid if the appliance is 
installed by an appropriately qualified engineer in 
accordance with the manufacturer’s instructions 
and to the appropriate Building Regulations and/or 
Local By-Laws and serviced within 12 months of 
installation.  
 
Eco ideal will also support an extended 5 year 
warranty on external Cast Iron components such 
as Doors, Flue Collars and Covers. 
 
If this appliance is purchased through an un-
authorised stockist or an internet trader Eco-ideal 
Stoves are only obliged to support the statutory 
requirements. 
 
This appliance must be regularly serviced and 
maintained, using only Eco-ideal Stoves approved 
components for the Warranty to be valid. 
 

Summary of Contents for CVSECI05FM

























Reviews: