background image

6

For parts or assistance, call ECO-FLO Customer Service at 1-877 326-3561

SAFETY INFORMATION

PRECAUTIONS

1. This document serves only as an installation guide.    

  Refer to your state and/or local plumbing or onsite  

  wastewater treatment and disposal regulations for de

  tails pertaining to your systems design, installation 

  and maintenance requirements.

2. Keep this instruction manual in a safe place for future 

  reference.

3. The motor of this pump has a thermal protector that 

  will trip if the motor becomes too hot. The protector 

  will reset itself once the motor cools down and an 

  acceptable temperature has been reached. The 

  pump may start unexpectedly if it is plugged in.

4. Ensure the electrical power source is adequate for the

  requirements of the pump.

5. This pump is made of high-strength, corrosion-

  resistant materials. It will provide trouble-free service 

  for a long time when properly installed, maintained, 

  and used. However, inadequate electrical power to 

  the pump, dirt, or debris may cause the pump

  to fail. Please carefully read the manual and follow the

  instructions regarding common pump problems and  

 remedies.

  

DANGER:

 Do not pump flammable or explosive 

   

liquids such as oil, gasoline, kerosene, ethanol, etc. 

   

Do not use in the presence of flammable or explosive 

   

vapors. Using this pump with or near flammable liquids 

   

can cause an explosion or fire, resulting in property 

   

damage, serious personal injury, and/or death.

  

DANGER:

 ALWAYS disconnect the power to the pump

   

before servicing.

  

DANGER: 

Do not touch the motor housing during 

   

operation. The motor is designed to operate at high    

   

temperatures. Do not disassemble the motor housing.

  

DANGER:

 Do not handle the pump or pump motor with  

   

wet hands or when standing on a wet or damp surface,  

   

or in water. lf basement floor is wet, do not walk on wet  

   

area until all power is turned off. If shut-off box is in    

   

basement, call the electric company to shut off 

   

service to the house, or call your local fire department  

   

for instructions.

   

Remove pump and repair or replace. Failure to follow 

   

this warning can result in fatal electrical shock.

  

WARNING:

 Extension cords may not deliver sufficient

   

voltage to the pump motor. Extension cords present

    

a life threatening safety hazard if the insulation be

   

comes damaged or the connection ends fall into    

   

water. The use of an extension cord to power this    

   

pump is not permitted.

  

WARNING:

 Secure the discharge line before starting 

   

the pump. An unsecured discharge line will whip,    

   

possibly causing personal injury, and/or property    

  

damage.

  

WARNING:

 Release all pressure and drain all water   

   

from the system before servicing any component.

  

WARNING:

 Wear safety goggles at all times when    

   

working with pumps.

  

WARNING:

 This unit is designed only for use on 115 

   

volts (single phase), 60 Hz, and is equipped with 

   

an approved 3-conductor cord and 3-prong 

   

grounded plug. Do not remove the ground pin under  

   

any circumstances. The 3-prong plug must be 

   

directly inserted into a properly installed and 

   

grounded 3-prong, grounding-type receptacle. Do

   

not use this pump with a 2-prong wall outlet. Replace  

   

the 2-prong outlet with a properly grounded 3-prong  

   

receptacle (a GFCI outlet) installed in accordance    

   

with the National Electrical Code and local codes    

   

and ordinances. All wiring should be performed by a  

   

qualified electrician.

  

WARNING:

 Protect the electrical cord from sharp 

   

objects, hot surfaces, oil, and chemicals. Avoid 

   

kinking the cord. Do not use damaged or worn cords.

  

WARNING:

 Failure to comply with the instruction and

   

designed operation of this unit may void the warranty.

   

ATTEMPTING TO USE A DAMAGED PUMP can result  

   

in property damage, serious personal injury, and/or   

  

death.

  

WARNING:

 Ensure that the electrical circuit to the

   

pump is protected by a 15 Amp fuse or circuit 

   

breaker.

  

 

  

CAUTION:

 Do not lift the pump by the power cord.

Summary of Contents for ESE50WB1830









Reviews: