background image

EPP 
with
Vertical 
Switch

EPC 
with  
Vertical 
Switch

OWNER’S MANUAL

 

PED SERIES

1/3 & 1/2 HP 

Pedestal Sump 

Pumps

CONTENTS:

General Safety . . . . . . . . . . . . . . . . . . . . 1

Applications & Specifications . . . . . . . . .2

Pre-Installation & Assembly. . . . . . . . . . .3  

Installation . . . . . . . . . . . . . . . . . . . . . . . 4

Operation, Care/Cleaning & Parts. . . . . . 5

Troubleshooting . . . . . . . . . . . . . . . . . . . 6

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . 7 

BEFORE YOU START

A sump pump is an electrical 

device designed to operate in 

inheretly wet environments.

ALWAYS USE EXTREME 

CAUTION

 

when installing or 

maintaining this product.

 

®

Carefully read and follow all safety  

instructions in this manual and on pump. 
SAVE THESE INSTRUCTIONS – This manual 

contains important instructions that should be 

followed during installation, operation, and  

maintenance of the product.  

Save this manual for future reference.
Safety Labels

 

 

         This is the safety alert symbol. When you 

see this symbol on your pump or in this manual, 

look for one of the following signal words and be 

alert to the potential for personal injury!
 

 

Indicates a hazard which, if 

not avoided, will result in death or serious injury.
 

 

Indicates a hazard which, 

if not avoided, could result in death or serious 

injury.
 

 

Indicates a hazard which, if 

not avoided, could result in minor or moderate 

injury.

NOTICE

 indicates practices not related to 

personal injury.
Keep safety labels in good condition. Replace 

missing or damaged safety labels.

General Safety

 

 

Risk of burns. Do not 

touch an operating motor. Motors are de-

signed to operate at high temperatures. To 

avoid burns when servicing pump, allow it to 

cool for 20 minutes after shut-down before 

handling.
Do not allow pump or any system compo-

nent to freeze. To do so will void warranty.
Pump water only with this pump.
Periodically inspect pump and system com-

ponents.
Wear safety glasses at all times when work-

ing on pumps.

IMPORTANT SAFETY INSTRUCTIONS

Summary of Contents for EPC33








Reviews: