TEMP Button :
Press this button to lower the indoor
temperature
RESET Button:
When you press the recessed RESET button,
all current settings are cancelled and the control will return to
the initial settings.
SLEEP Button:
Press this button to go into the Energy-Saving
operation mode. Press it again to cancel. This function can
only be used on COOL, HEAT and AUTO mode and maintain the
most comfortable temperature for you.
2
1
6
ON/OFF Button:
Press this button to start operation, press
thebutton again to stop operation.
9
TEMP Button :
Press this button to raise the indoor
temperature
2
AIR DIRECTION Button:
Press this button to change the swing
angle of the louver. Each pressing of this button advances the
o
swing angle of the louver by 6 . When the louver swing is set
at a certain angle which affects the cooling and heating
performance, it will automatically change the swing direction .
MODE Selection Button:
Each pressing of the button
advances the mode setting in sequence.
AUTO
COOL
DRY
HEAT
FAN
3
FAN SPEED Button:
Press select the Fan Speed in four steps-
AUTO LOW
MED or HIGH. Each pressing advances the,
fan speed in sequence.
8
TIMER ON Button:
Press this button to initiate the auto-on time
sequence. Each pressing will increase the auto-timed setting in
30 minutes increments. When the setting time displays 10:00, each
press will increase the auto-timed setting 60 minutes increments.
To cancel the auto-timed program, simply adjust the auto-on time
to 0:00.
10
11
4
5
NOTE:
Whilst the unit is running in SLEEP mode, pressing
any other buttons will terminate the SLEEP mode.
!
1
Model
Transmission Distance
Lowest Voltage of CPU
Emitting Signal
Rated Voltage
ECO906SQ, ECO1206SQ, ECO1806SQ.
-5 C 60 C
8m (when using 3.0 voltage,
it Gets 11m)
3.0V(Alkaline dry batteries LR03
2)
2.0V
•
Remote Controller Specification
Performance Features
Features of the Remote controller buttons
1. Operating Mode: AUTO, COOL, DRY, HEAT and FAN
2. 24-hour Timer Setting Function
3. Indoor Setting Temperature Range : 17 C~30 C.
4. Full function of LCD (Liquid Crystal Display)
Fig. 1
( C)
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE
FAN SPEED
TIMER ON
SLEEP
ON/OFF
TIMER OFF
AIR
DIRECTION
RESET LOCK
1
2
4
5
6
7
3
8
9
10
11
12
13
14
Environment
SET TEMPERATURE
SWING
LED
DISPLAY
TURBO
SWING Button:
Press this button to activate auto
swing feature of the horizontal louver. Press it again to
deactivate.
LED DISPLAY Button:
Press this button to shut off the digital
display on the indoor panel display, press it again to activate it.
7
