TO DRAIN WATER
TO EMPTY THE BUCKET
Pull bucket out
Lift by the handle
Remove the cover Pour the water away
Restore the cover and the handle
Restore the bucket
NOTE:
1. When the bucket is full, the Full/Check LED lights up and the unit stops.
2. Do not move the unit or remove the bucket, if the machine is still operating, as
water may leak, damage the unit or cause an electric shock.
3. To remove the bucket, pull it out by gripping the bottom of the bucket, and
lift carefully.
4. Remove the cover of bucket first, then pour the water away, clean the bucket and
restore the cover and the bucket to the correct position.
Clean the bucket with clean water if needed. Do not use detergent, solvent,
abrasive or hot water to avoid damage to the appliance.
Do not remove or damage the float in the bucket, the unit will not work correctly.
The bucket cover must be well fitted in position.
The "Full/Check" LED lights if the bucket is not well in place.
You may use a hose with an inner diameter of 12mm for
continuous drainage:
1. Use a screwdriver to remove the knockout at the back.
Attach the tubing to the connector through the hole.
2. The tubing should be lead to the drain with no sharp bends.
NOTE:
1. The bucket must be in the correct position before tubing.
2. Remove the tubing before pulling out the bucket.
8
AirControl
dle
e
l
l
ll
c
clean
lean wa
wa
er to avo
er to avo
orr damage
damag
r mus
m
S
S
S
S
S
S
S
S
S
S
Systems
ve
e the
he c
cove
ov r
Sy
te
yst
yst
yste
teeeeee
yst
yyyyyyyyyyy
Sy
S
S
S
