ECM afm1000, Instruction Manual

Page: 18 / 28

Safety Warnings
In the installation and use of this product, comply with the National Electrical Code and any
other applicable Federal, State, or local safety codes.
Always wear eye protection when working near engines, vehicles, or machinery.
During installation, turn off the power and the engine and take all other necessary
precautions to prevent injury, property loss, and equipment damage. Do not apply power or
start the engine until all wiring is completed.
Never work on a running engine.
When installing the AFM’s cabling and sensor on a stopped engine, it is best to think-out
your moves before you make them.
Route and cable-tie all cables away from hot, moving, sharp, high energy (spark), and caustic
objects.
Take into consideration the movement of the engine, chassis, and wind buffeting when
instrumenting the engine.
Clear tools away from the engine before starting.
Operate the engine only in a well ventilated area and never when you or one of your co-
workers is tired.
One measure of professionalism is how much you and your co-workers can accomplish
without an injury. Always be at your professional best. Think and act with safety in mind.
14