SETTING ADDITIONAL LIMIT POSITION(S):
(up to 4 mid limit positions can be set)
1. Use the Up/Down buttons on the remote to move the blind
to the required position
2. Press the Program/Learn button on the back of the remote
until the motor jogs
3. Press the Program/Learn button on the back of the remote
until the motor jogs, limit position is now set
4. Repeat steps 1-3 for all desired positions
FINE TUNING PRE-SET LIMIT POSITION(S):
1. Use the remote to move the blind to the pre-set limit position
that is to be tuned
2. Press the Program/Learn button on the back of the remote
until the motor jogs
3. Use the Up/Down buttons on the remote to fine tune the position
4. With blind in the new desired position, press the Program/Learn button
on the back of the remote until the motor jogs. New limit position
is now set
DELETING AN ADDITIONAL LIMIT POSITION(S):
1. Use the remote to move the blind to the limit position that is to be deleted
2. Press and hold the Program/Learn button on the back of the remote for
approx. 7s until the motor jogs (please note motor will jog after approx.
1-2s after button is pressed and then jog again after approx. 7s), limit
position is deleted
DELETING A SINGLE CHANNEL FROM MOTOR MEMORY:
(Please note this will only delete a single pre-programmed channel,
this does not remove any limits)
1. Select the channel on the remote that is to be deleted
2. Press the Set button on the motor until the motor jogs once
3. Press the Program/Learn button on the back of the remote
until the motor jogs, channel is now deleted from motor
2
PROGRAM BUTTON
LEARN BUTTON
Eclipse Blinds Systems Inchinnan Business Park Renfrew Scotland PA4 9RE
Customer Support:
+44 (0)141 814 3500
