Eclipse ecoflex ECO-100 Operation, Maintenance And Servicing Manual Download Page 4

 

 

 

• The ECO-FLEX® Product Line, Designed and Engineered by Eclipse Surface Technologies LLC • 

www.eclipseblast.com

  

 

 

 

 

 

Personal Protective Equipment 

 

Wear all appropriate personal protective equipment when operating equipment and/or when in 
the work area.  Personal protective equipment (P.P.E.) can help prevent serious injury, including 
eye injury, hearing loss, inhalation of toxins, fumes and dust.

 

 

P.P.E. includes hearing protection, eye protection, protective clothing, shoes and gloves.

 

 

Properly fit-tested and government approved respirator that is suitable for the collection of 
dust.   

 

 

Misuse of equipment can cause death or serious injury. 

 

Do not use equipment if fatigued or under the influence of drugs or alcohol. 

 

Do not exceed the maximum working pressure or temperature rating of the equipment (see 
Manufacture’s Data Report). 

 

Always be aware that blast nozzle may have a recoil effect when activating trigger. 

 

Do not use equipment without proper hose safety cables or hose safety clips. 

 

Do not operate equipment on an unstable surface. 

 

Do not leave equipment unattended without depressurizing all air hoses. 

 

Check equipment daily.  Replace all worn or damaged components with genuine manufacture’s 
replacement parts.   

 

Do not alter or modify equipment.  Modifying/altering equipment will render system unsafe and 
will void warranty.    

 

Only use equipment for its intended purpose.  

 

Route all hoses away from high traffic areas.  Anything lying on the ground is considered a 
tripping hazard.   

 

Do not kink, over bend hoses or use hoses to move equipment. 

 

Keep children and animals away from equipment and work area. 

 

Always comply with all safety regulations. 

Summary of Contents for ecoflex ECO-100














Reviews: