P0031-LU-02.01 9
Before Arming the System
Before attempting to arm the system, ensure that all protected areas are secure by closing
any windows etc. If the system is not ready for arming the remote keypads scroll the zones
that are active. The “Ready” indicator on the LED remote keypad will also be off:
Zone 01: Active
Front Door
Zone 04: Active
Lounge Detector
Active zones are scrolled in sequence.
01
04
Ready off
Away Arm -
A
The away arming mode is used for protecting all detection zones and is normally used when
leaving the premises unoccupied. Before arming the system check that the system is ready
for arming. To away arm your alarm system, please proceed as follows:
Ur
User Menu
01: Stay Arm 1
Exit Now: 010
18:30 28/04/2011
Enter your access code
.
????
Press the
A
key.
The display shows the remaining time
before the system is armed.
System Armed
18:31 28/04/2011
10
--
The system is now away armed.
Armed on
If the Quick Away Arm feature is enabled at the selected remote keypad, you may
omit step 1 from the above procedure.
Summary of Contents for EC-P8
Page 1: ...EC P8 Security System User Manual...
Page 40: ......
