Motion Picture customization
Importing display data
Motion Picture Customize
Load the Display data in the USB memory or CD-R, which is downloaded from the E-iSERV
(website), to the main unit. For details of the operation, see ‘Importing display data (DISP Data)’
in the Owner’s Manual.
The application for creating Motion Picture screens (Cutting Board) can be downloaded, allowing
you to create your own original Motion Picture screens.
You can create your own
fi
le by downloading the cutting board application. You can download the
ready-made
fi
les from the server.
How to download the Motion Picture
fi
les
Download the Motion Picture from the E-iSERV website, and then write it to USB
memory or CD-R.
ATTENTION
<When using a USB memory drive>
• Data downloaded from the ECLIPSE website (E-iSERV) should be saved in folders on the USB
memory as follows: (NOTE: in order for the system to properly recognize and load DISP data,
the user must create and name their folders as shown in the diagram below).
ECLIPSE
DISP
File extension
ZZZZZZZ.XXX
Must be created by user
Motion Picture
.eld
• The main unit cannot be in USB music playing mode during this procedure.
<When using a CD-R>
• The main unit can only import
fi
les located in the root directory of the CD-R.
File extension
ZZZZZZZ.XXX
Motion Picture
.eld
• Disc formats that may be used are as follows:
• CD-ROM (MODE 1)
• CD-ROM (MODE2_FORM 1)
* NOTE: CD-ROMs written in MODE2_FORM2 cannot be read.
• When data is imported from a CD-R, the importing process will take a long time if a lot of
data other than the import data has also been saved to the CD-R.
11