background image

- 4 -

Play the audio at a moderate volume level that

permits you to hear sounds from outside the vehicle.

Driving with the inability to not hear outside sounds

may result in an accident.

This product must be operated only as on-board

equipment, or it may cause electrical shock or injury.

Do not play distorted sounds for long periods of time;

the speakers may overheat and cause a fire.

Do not cover the ventilation holes or the cooling plate

of the product. If the ventilation holes or cooling plate

are covered, heat will build up inside the product and

fire may result.

Do not clean the cables or cords with volatile

chemicals such as alcohol, kerosene, thinner or

gasoline. Using such chemicals may cause warping,

discoloration or other damage.

For best results, this product should be installed by a

professional installer. 

Contact the dealer whom you purchased the product

for an appointment.

When installing this product, be sure to use the

supplied mounting hardware. If parts other than

those supplied are used, the unit may be damaged

internally, or may not be held in place securely and

become dislodged.

Avoid installing this product in places where it may

get wet, such as near windows, or in places that are

moist, damp, or dusty. Presence of liquid, moisture,

or dust inside this product can cause short circuiting

resulting in smoke and / or fire.

If this product is not connected properly, a short

circuit, fire, and / or accident may occur.

When routing cables, use care so that they do not

contact sharp metal parts such as brackets or screw

tips. Otherwise, a short circuit, electric shock, fire and

/ or accident may result.

Summary of Contents for DCU105













Reviews: