Eclipse CD8454 Owner'S Manual Download

Page: 92 / 180

How to operate the tuner

Setting a station name

Press the [FUNC] button for less than one second while
in the tuner mode.

Turn the [SEL] button to select Station Name.

Press the [SEL] button.

Press the [SEEK

] button to select the character type.

Pressing the button will switch types from [ABC] (upper-case
alphabet characters) to, [123] (numeric characters) and then
[!&?] (symbols).

The station name setting mode is activated.

The selected item will be highlighted.

Press either [SEL] or [FAST

] button to select the

position in which to enter the character.

The character will be inserted where the cursor is flashing:
[SEL] button:

Moves the cursor to the right.

[FAST

] button: Advances the cursor to the left.

Station name settings can be changed.

[SEL] button

[FAST

] button

[FUNC] button

[SEEK

] button

[RTN] button

Summary of Contents for CD8454





















































































































































































Search results

Summary of Contents for CD8454

Reviews:

Related manuals for CD8454

Brands by name

Popular brands

Eclipse CD8454, Owner'S Manual

Search results

Summary of Contents for CD8454

Reviews:

Related manuals for CD8454

Brands by name

Popular brands