manualshive.com logo in svg

Eclipse CD8061, Owner'S Manual

Share
Download
Eclipse CD8061 Owner'S Manual Download Page 35

35

Basic operation

Switching the spectrum analyzer display

1. Press the [FUNC] button.

2. Press the [

BND

] button until [SA] appears on

the screen.

3. Switch ON/OFF by pressing the [SOURCE] button.

4. Press the [FUNC] button to cancel the function

mode so that the settings are enabled.

Changing the spectrum analyzer's

sensitivity

1. Press the [FUNC] button.

2. Press the [

BND

] button repeatedly until [SENS]

appears on the screen.

3. Press the [SOURCE] button to switch the

spectrum-analyzer mode.

Each press of the button changes the sensitivity of the
spectrum analyzer.

4 . Press the [FUNC] button again.

Switching the level meter display

The display pattern of the indicator like a meter in the right
of the display is switched.

1. Press the [FUNC] button.

2. Press the [

BND

] button until LEVEL DISP

appears on the screen.

3. Switch the level meter display by pressing the

[SOURCE] button.

Mode A:  Vol level.

Mode B: S  meter (radio)/source level (except radio)

indicator.

OFF:

The indicator display becomes OFF.

4. Press the [FUNC] button to cancel the function

mode so that the settings are enabled.

Hi

Mid

Lo

Summary of Contents for CD8061













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands