Eclipse CD7100, Owner'S Manual

Page: 48 / 301

48
Various Settings
SVC Setting examples:
The volume for the initial FM mode (default value: 40) is used as a reference for storing the differences
in volume that have been set for each audio mode.
*: The volume levels can be set to a maximum of 80 and a minimum of 0. If you try to go past
the maximum or minimum volume level, the level will not change.
The volume difference can be set within a range of -10 to +20.
ATTENTION
If the battery terminals have been disconnected because of a reason such as vehicle maintenance,
the SVC settings will return to their default values. If this happens, you will need to make the
settings again.
NON-F
(NON-FADER
LEVEL)
Adjusts non-fader level (for
connected sub-woofer).
Increase the
sub-woofer
level. Decrease the
sub-woofer
level.
- -
LOUDNESS
The loudness control may be turned
on the emphasize low and high
frequencies at low volume levels.
Loudness compensates for the
apparent weakness of low and high
frequencies at low volume by
boosting the bass and treble levels.
Select ON Select OFF
- -
Audio mode FM AM CD USB
Default value
(Volume level)
Reference
(40)
0
(40)
0
(40)
0
(40)
SVC setting
(Volume level)
Reference
(40)
SVC setting
value
+15 (55)
SVC setting
value
-10 (30)
SVC setting
value
+5 (45)
When volume level in FM
mode is adjusted from 40 to
45
45 55
→
60 30
→
35 45
→
50
When volume level in CD
mode is adjusted from 35 to
60
45
→
70 60
→
80* 60 50
→
75
When volume level in AM
mode is adjusted from 80 to
20
70
→
5 20 60
→
0* 75
→
10
When volume level in USB
mode is adjusted from 10 to 35
5
→
30 20
→
45 0
→
20 35