manualshive.com logo in svg

Eclipse CD5423, Owner'S Manual

Share
Download
Eclipse CD5423 Owner'S Manual Download Page 31

31

Basic operation

Here, the HPF (high-pass filter) to the front and rear preouts
can be switched ON and OFF.
Since the high-pass filter passes only higher ranges (lower
ranges are cut off), efficient playback is enabled by cutting off
lower-range elements not needed for the mid to higher range
speaker.

Turn [SEL] button to select X-OVER FR.
Press the [SEL] button.

The cross over (front/rear) switching mode is activated.

Turn [SEL] button to select ON or OFF.
Press the [RTN] button. 

At this time, other adjustments can also be made in Sound
Adjustment Mode.

Press the [SOUND] button to exit Sound Adjustment
Mode.

5

4

3

2

1

These modes adjust bass (low sounds) and treble (high
sounds).

Turn [SEL] button to select BASS/TREB.
Press the [SEL] button.

The BASS/TREB setting mode is activated.

Turn [SEL] button to select BASS/TREB.
Press the [SEL] button.

The frequency selection mode is activated.

Turn [SEL] button to display the frequency to be
selected.
Press the [RTN] button. 

At this time, other adjustments can also be made in Sound
Adjustment Mode.

Press the [SOUND] button to exit Sound Adjustment
Mode.

7

6

5

4

3

2

1

Disabling the Cross Over (F,R) function

SETTING BASS/TREBLE

[SOUND] button

[RTN] button

[SEL]
button

Summary of Contents for CD5423

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands