background image

INTERCONNECTING WIRES
(Speed pulse, parking brake, reverse)

- 6 -

Never cut the insulation on the power wire or use it to power any other equipment. If the rated current capacity of the power wire

is exceeded, fire and electric shocks may result.

The wires should be secured with tape or a similar securing method to prevent any obstructions while driving. If they get wound

or entangled around components such as the steering wheel, shifting lever, or brake pedal, accidents may result.

If removing the end of the wire to connect to another wire, be sure to wrap PVC tape or a similar wire insulating method around

the connection to insulate it. If the connection is not insulated, fire or accidents may result.

Name and functions of ter

Name and functions of ter

minals

minals

1

2

3

4

5

20P

GPS ANTENNA

13

13

10P

C

6

7

9

10

11

12

I

G

F

E

D

A

ANTENNA PLUG

MAIN UNIT

1

INTERCONNECTING WIRES
(Sub-woofer, line out, and steering
remote control connector)

4

INTERCONNECTING WIRES
(Rear speaker wires)

3

INTERCONNECTING WIRES
(Power and front speaker wires)

2

H

Refer to page 7 for details on the wire colors and connection points for interconnecting wires 

,

,

,

,

and .

Refer to page 8 for details on connection points              to         C   for the main unit terminals.

7

6

5

4

3

2

Tip

C

Use supplied wire harness with this main unit.  Other manufacturers may use a similar wire harness connector but pin

configurations are incorrect for use with Eclipse main units and can damage the main unit.  Prior to powering up the main unit,

please make sure the main unit is properly grounded with the vehicle chassis.  If no ground is available to the chassis, add a

ground strap from the main unit to the vehicle chassis to improve the ground.

Do not use with speakers having 1 to 3 ohms impedance.  This main unit is designed to be used with high-powered speakers

rated above 50 W with impedance rating between 4 and 8 ohms.

8

English

E

spañol

Français

Italiano

Nederlands

Svenska

English

6P

1P

6P

5P

5P

INTERCONNECTING WIRES
(Video input)

7

5

INTERCONNECTING WIRES
(Video output and RSE)

6

A

B

Summary of Contents for AVN6610

















Reviews: