- 11 -
Deutsc
h
Español
Français
Italiano
Nederlands
Svenska
English
•
•
Carefully bind any excess length of cable that is
connected to the main unit and secure it to an area of
empty space in the vehicle so that it does not move
around or get caught in the main unit or vehicle-side
equipment. If the cables are not handled correctly,
operating problems or short-circuits may occur, and this
may result in the danger of fire or other accidents.
•
•
Connect all cables before installing the main unit.
Tip
Installing the main unit
Installing the main unit
30˚ or less
Front
7
1
11
1
Level (reference)
To maintain proper function, the unit must be mounted
less than 30 degrees. If the angle is in excess of 30
degrees, CD skipping and improper CD ejection may
occur.
1
Remove the carrying bracket.
2
Remove the pocket and any other accessories from the
centre cluster to make room for the main unit.
4
Mounting bolts
Pocket, etc
Centre cluster panel
Remove the mounting brackets for the pocket.
5
The hexagonal head bolts (Red) which are removed
may be used again later when reinstalling.
Tip
When it is not required to detach the PND from the
main unit, use the provided screw to attach the control
panel to the main unit.
3
The hexagonal
head bolts
(Red) x4
