Operating Instructions
1. Install the charged battery by sliding it into the base of the tool handle until it
clicks into place. The battery should be secured and unmoveable.
2. Take a look at the operation of tool switch system.
There are 3 settings: Move to left (Forward),
Center (Neutral), Move to right (Reverse).
When the tool is not in use or is idle,
it should rest in the central position. The
picture on the right shows the cutter Neutral
state.
For Safety Reasons, when the tool is sitting idly or once you are finished with it, put
the tool switch in the central position.
5
When the switch to the right, the blade goes backward.
When the switch to the left, the blade goes forward.
