Eclipse 902-605, Instruction Manual

Page: 5 / 9

the temperature over 60
℃
under long time working, the fault signal sounds, it
means the toll can’t continue work until the temperature reduce to the normal.
OPERATING INSTRUCTION
Read the entire SAFETY INFORMATION section at the beginning of this manual
including all text under subheadings therein before using this product.
Use this tool for the manufacturer’s intended purpose only. Use other than that
described in this manual may result injury or property damage.
Series
No
Instruction
LED
(red) LED
(white)
OLED screen What it
means
1 Self-checking
¤¤
（
2Hz
）
Self-checking to
assure everything
is ok
2 Light
Delay
20s off
Timeout 5
minutes off
Enter the
working state,
the battery is
full
3
Charging
signal
¤¤¤
（
2Hz
Lacking power
and needs
charging.
¤
（ 5ms)
Lacking power
and needs
charging.
¤
（ 100ms)
No power and
needs charging
immediately
4
High
temperature
warning
¤¤¤¤
（
2Hz
）
◎◎◎◎
（ 2Hz ）
Motor surface
temperature is
too high, waiting
for cooling to
restart the tool
5
overload
¤
(3s)
Battery
reloading,
recovery work
interface
6
Crimp is not
normal
¤
(5s)
◎
(5s)
Battery
reloading,
recovery work
interface
7
Maintenance
reminder
◎
(0.5s)
Tool must be
maintained