background image

 

 

Instruction Manual 

 

Battery Brushless Motor Crimping Tool   

P/N: 902-605 

 

 

      Due to continuing improvements, actual product may differ 

      slightly from the product described herein. 

Read this material before using this product.

 

Failure to do so can result in serious injury. 

SAVE THIS MANUAL 

 

SAVE THIS MANUAL 

Keep this manual for the safety warnings and precautions, assembly, operating,   
inspection, maintenance and cleaning procedures. Write the month and year of 
purchase. Keep this manual and the receipt in a safe and dry place for   
future reference.   

IMPORTANT SAFETY INFORMATION 

In this manual, on the labeling, and all other information 
provided with this product: 

 

This is the safety alert symbol. It is used to alert you to potential 
personal injury hazards. Obey all safety messages that follow this 
symbol to avoid possible injury or death. 

 

DANGER indicates a hazardous situation which,   
if not avoided, will result in death or serious injury. 

 

WARNING indicates a hazardous situation which,   
if not avoided, could result in death or serious injury. 

 

CAUTION, used with the safety alert symbol,   
indicates a hazardous situation which, if not avoided,   
could result in minor or moderate injury. 
 
 
 
 
 

Summary of Contents for 902-605










Reviews: