EC-3150 THERMAL BARCODE PRINTER
75
70. SET HEAD
Description
This setting is used to enable/disable head open sensor. If head open
sensor is closed then when printer head is opened there isn’t any
message returned. This setting will be saved in printer memory.
Syntax
SET HEAD ON /OFF
Parameter
Description
ON
Turn on the “HEAD OPEN” sensor
OFF
Turn off the “HEAD OPEN” sensor
Example
SET HEAD ON
SET HEAD OFF
71. SET RIBBON
Description
Set the on / off RIBBON sensor, ie to switch the Thermal transfer / Thermal Direct
Usually when the printer is powered on,
Ribbon sensor will automatically detect whether the printer has been installed on the
ribbon, and to decide to use the thermal or thermal Printed.
This setting is not stored in the printer. This method is only applicable to heat transfer machines
Syntax
SET RIBBON ON /OFF
Parameter
Description
ON
Thermal transfer
OFF
Thermal Direct
Example
REM
***Direct
printing**** SIZE 4,4
GAP 0,0
DENSITY 8 SPEED
6
DIRECTION 0 REFERENCE
0,0
SET PEEL OFF
SET RIBBON OFF
CLS
BARCODE 100,100,"39",48,1,0,2,5,"CODE 39”
PRINT 1
