USER MANUAL / MANUAL DE USUARIO
– MICROSTAR
Page
26
of
64
INMANUUML019 USER MANUAL - M. USO OM-200 V.2023.01 ENG-ESP US
7. MAINTENANCE
To maintain optimum operation of the Ecleris Microstar OM-200 Microscope, it is recommended
to perform a revision of the equipment once a year.
This procedure should include:
Checking turns and movements in order to evaluate the lubrication of the pieces.
Cleaning
Revision of electrical connections
Visual inspection of components
Spare parts: to avoid loss of time, and an inoperative microscope, it is recommended to
have a spare fuses (See Technical specifications).
Todas las piezas móviles y mecanismos son libres de mantenimiento y no requieren lubricación
periódica.
Para realizar cualquier trabajo de revisión y mantenimiento contacte a su distribuidor local o a la
oficina de ECLERIS más cercana.
7.1 CLEANING
Before cleaning the microscope, disconnect the power supply cable from the mains.
7.1.1 CLEANING THE EXTERNAL SURFACES
Clean the external surface of the device using a piece of cotton or cloth moistened with mild
detergent or soap. Use only adequate products for the external cleaning of electrical equipment,
prepared in accordance with the manufacturer
’s indications.
It is recommended to clean the external surface of the device every 15 days.
Perform the cleaning with special care, avoiding water or humidity access to the
equipment.
Do not use flammable products, or solvents.
Do not use abrasive detergents, solvents or any other abrasive agent.
Do not sterilize. The device only requires disinfection.
7.1.2 DISINFECTION
Disinfect the microscope using a cloth dampened with a 70% ethanol solution. It is recommended
to put the ethanol solution on a clean cloth and not on the microscope. Wipe on the external
surface of the device, specially the pieces that are handled frequently.
7.1.3 CLEANING OF OBJECTIVE LENS AND EYEPIECES
Smoothly rub the lens surface using circular movements with a thin tissue paper moistened in
pure acetone or 99% solution.