15
7.3. Connection terminal block diagram
1.
Balanced audio terminal
2.
Balanced audio output earth terminal
3.
Balanced audio output
–
terminal
4.
Power supply input: 0VDC terminal
–
(
**
)
5.
Power supply input: +24VDC te (
**)
6.
Power supply input: +15VDC te (
**
)
(
**
) The WPaMIX-T requires an external 24VDC power supply (connected to terminals 4
and 5, min 30mA) or 15VDC (connected to terminals 4 and 6, min 30mA). We suggest
using the Ecler WP24-PSU, which can power up to twenty WPaMIX-T units (depending
on voltage losses caused by cable lengths and sections).
Recommendation:
Since the WPaMIX-T does not incorporate any electromagnetic
shielding, we strongly recommend that it is installed well away from power sources and
high-voltage cables.
For the installation of an eMCONTROL1 unit next to a WPaMIX-T wall panel, on surface
or flush mounting, see the eMCONTROL1 user manual.
REMOTE CONNECTORS
8.1. WPaCNX-CBO
WPaCNX-CBO is a wall-mounted remote control, with an XLR female, 3-pin + stereo jack
(combo connector). This connector can be screwed at the rear (does not require any
soldering).
Figure 18: WPaCNX-CBO
