3
1.
Establishing communication with the Cisco Ethernet Switch
1.
Connect your computer to the Cisco Ethernet Switch using an Ethernet
cable. The Cisco SG300 Ethernet Switch comes with a default Static IP
address of
192.168.1.254
; you must configure your PC with a Static IP
address in the same subnet.
2.
Set a Static IP address on your computer network interface card, such as
192.168.1.66 along with the following mask 255.255.255.0.
3.
Open your Internet browser and digit the default IP address of the switch:
http://192.168.1.254
.
The
Default User ID
and
Password
for the unit is
“
Cisco
”.
2.
Enabling IGMP Protocol
The IGMP Protocol is mandatory for the correct operation of the VEO over IP
products in multicast configurations. Without IGMP the audio/video can’t work
properly or may freeze.
1.
Select
Multicast
→
Properties
. Enable the
Bridge Multicast Filtering Status
by activating the related selection box and clicking on
Apply
.
