6
3.1
MAIN FEATURES
•
2-way passive loudspeaker for surface and ceiling mounting.
•
2x 4" woofers with 4-layer voice coil improves power handling and low frequency
response.
•
1" silk tweeter with neodymium magnet and ferrofluid.
•
Glass-fibre reinforced ABS non resonant compact enclosure.
•
Wide dispersion pattern.
•
VEASY bracket compatible with VESA 75 included. Quick and easy to install,
including jumps and markings for repeating speaker orientation.
•
Weather-protected with an IP-44 rating.
•
Available in white, black and gold colour.
•
RAL paint customization available.
4.
CONNECTIONS
The connection cables which connect the amplifiers output and the speaker should be of
good quality, have sufficient conductor area and be as short as possible. The latter fact is
especially important when the distance is long and the load impedance low (4-16
Ω).
A
cross-section of at least 2.5mm2 is recommended for distances up to 10m; 4 or 6mm2 for
longer distances. Following formula gives the required section, assuming 4% losses:
Cross section in mm
2
=
Length in m
Loudspeaker impedance in Ω
Always respect the polarity
. The loudspeaker has an INPUT Euroblock connector,
and a second STACK Euroblock connector thereby facilitating the parallel connection of
speaker.
See
detailed connection diagram on next page
.
