11
5.9. Front panel controls and LED indicators
The following elements are available on the MIMO SG series front panel:
•
Input LED indicators
: indicate the presence
of audio signal at the unit’s input, and
its intensity level (green, amber and red indicate in this order the increased intensity
level)
•
Output LED indicators
: indicate the presence of audio signal at the unit’s output,
and its intensity level (green, amber and red indicate in this order the increased
intensity level)
•
Status LED indicators (STATUS
):
o
DATA
: Off: there is no connection to EclerNet Manager even if connected
to Ethernet. On: connected to EclerNet Manager or to other third party
application via TP-NET protocol. Flashing: data traffic with EclerNet
Manager or another application.
o
POWER
: Illuminates when the unit is in operation. It flashes if there is an
error in the unit or if firmware is not correct. It also flashes when you update
firmware
CLEANING
The front panel should not be cleaned with dissolvent or abrasive substances because
silk-printing could be damaged. To clean it, use a soft cloth slightly wet with water and
neutral liquid soap; dry it with a clean cloth. Be careful that water never gets into the unit
through the holes of the front panel.
