6
•
Ethernet control port, RJ45 connector (Compatible with EclerNet Manager, UCPs
and TP-NET protocol)
•
RS-232 control port, DB9 connector (for integration with third-party systems, via
TP-NET protocol)
•
Programming and remote management via Ethernet via EclerNet Manager
application (either point-to-point, with direct CAT5/CAT6 cable, or from an Ethernet
network connection)
•
Remote control via custom control panels UCP (User Control Panels)
•
iOS and Android remote control app available (Ecler UCP V2)
•
Remote control from third party external devices. (Crestron, AMX, Extron, Medialon,
etc., are registered brands from their respective owners). TP-NET protocol, through
Ethernet o RS-232 ports
•
Remote control via panels and digital consoles connected to the same Ethernet
network (WPNET and PAGENETDN series)
•
Embedded UCP panel server: EclerNet projects executed in the internal matrix
engine, acting as UCP server and as
hardware
control included in the project.
•
Configuration memory management (presets).
•
Events scheduled on a calendar basis
•
Broad DSP processing configurable. Examples:
o
Matrix router-mixer, from any input to any output (analog and/or digital
Dante™) with adjustable crosspoint level (independent mixes of different
inputs for each output).
o
Treatment of channels in mono or stereo mode.
o
Level, mute, vumeters and phase adjustment in inputs and outputs.
o
Internal signal generator (sinusoidal signal, pink noise, white noise, polarity
test).
o
Parametric EQ on inputs and outputs.
o
Delays on inputs and outputs.
o
Noise gate / compressor on input channels.
o
Compressor / limiter on outputs.
o
Priorities (ducking) between input channels.
o
Virtual and physical paging consoles
The programming of MIMO7272DN is done using the EclerNet Manager application
(*)
.
Refer to the EclerNet Manager Application manual for more information.
(*)
The EclerNet Manager application is available for download at
