9
7.
PAINTING
The IC series is designed to be painted, meaning it can be installed anywhere,
regardless of the aesthetic criteria of the place where it will be used.
In order to paint any of the models in the product line:
1.
Remove the protective grating from the speaker using the hook provided in
the packaging.
2.
Once the cut/paint template has been separated into two parts, use the
inside disk to protect the speaker cone. Place it tight on the cone. The points
still on disk after it has been separated help to fix it tight into place. The
outside part of the template can be put on the back part of the speaker,
lining it up with the plastic circle, to protect the back part from splattering if
you are using spray paint.
3.
Paint the protective grating and the speaker separately. Make sure that the
small holes in the grating are not blocked by paint. Use an appropriate air-
dry paint.
4.
When the paint is dry, remove the protectors. The unit is ready to be
installed.
