Ecler HMA120, User Manual

Page: 43 / 46

43
11. TECHNICAL CHARACTERISTICS 11. CARACTERÍSTICAS TÉCNICAS
11. CARACTÉRISTIQUES TECHNIQUES 11. TECHNISCHE DATEN
4

, 100V & 70V Output
Power
@1%THD (cold) PEAK
4
 110W 140W
8
 84W 105W
70V @ 41
 110W 140W
100V@ 85

110W 140W
Frequency response
70Hz - 17kHz (-3dB/4

)
High Pass Filter 3rd order Butterworth 70 Hz
THD+Noise @ 1kHz Full Power <0.2%
Channel crosstalk @ 1kHz >70dB (Inputs shorted)
AUX Output (L+R)
Output Level / Minimum Load
-6dBV / 10k

Frequency response 15Hz - 40kHz (-1dB)
LINE Inputs
Sensitivity / Nominal impedance LINE 1-2
0dBV / >70k

LINE 3
-6dBV / >70k

Signal Noise Ratio >87dB
MIC Inputs
Sensitivity / Nominal impedance MIC 1-2 (BAL)
-20 to -50dBV / >4.5K

LINE* (BAL)
-0 to -30dBV / >4.5k

CMRR MIC 1-2 (BAL) >70dB @ 1kHz
Signal Noise Ratio >60dB
Phantom voltage/current +15VDC / 8mA max.*
Talkover (MIC1 & MIC2) ATTACK TIME 50 ms.
RELEASE TIME 2 s.
DEPTH 30dB
THRESHOLD -30dB below max
Noise Gate (MIC1 & MIC2) ATTACK TIME 15 ms.
HOLD TIME 2 s.
RELEASE TIME 60 ms.
DEPTH 30dB
THRESHOLD -30dB below max.
Tone control (LINE & MIC)
BASS 100Hz ±10dB
TREBLE 6KHz ±10dB
Remote
Type WPmVOL-SR
Volume Analog control 0-10V (0V max volume)
Input Selection Analog control OFF-1-2-3-4
Mute
Configuration Normally open
Indicators
Signal Present Trigger level -35 dB
Clip
Power On
Auto Standby Trigger time after 2 minutes without input signal