16
8.
CONNECTION TO A UCP SERVER
From the home screen of the unit, the connection icon on the upper side of the screen
will give access to the Connection page:
This page allows deciding the UCP server the unit will connect to as a client. The UCP
server may be a computer, a MIMO4040DN matrix (yes, it has an embedded UCP server
in its engine!) another WPNETTOUCH / WPmSCREEN unit or even the same
WPNETTOUCH unit. In any case, the UCP server shall host and run an EclerNet
Manager project that includes a series of UCPs which can be remotely managed by any
UCP client.
